Silicone oil
Methyl silicone oil Type: 0.65~1000000mm2/s(mpa•s) Packaging: drum Quality system: ISO9001:2000
  • 基本信息 >
  • 相关属性 >
  • 其他事项 >

 

1. Methyl silicone oil

Type: 0.65~1000000mm2/s(mpa•s)

Packaging: drum

Quality system: ISO9001:2000

Application: used as electrical insulation, lubricant, shock- and moisture-proof, defoamation, ejection, damping, heat carrier and hydraulic oil; also as additive to plastics processing to improve the mold release property and wear resistance.

Characteristics: transparent, odorless, non-toxic oily liquid; high flash point, low solidifying point, good heat stability and resistance to high and low temperatures; can be used over a long period of time within a temperature range of -50C  to 180 C (in air isolation or inert atmosphere, long-term working temperature can reach 200 C); weak surface tension, high shrinkage, good anti-shear properties, small viscosity-temperature coefficient, good lubricating performance, excellent resistance to oxidization and ozone; also excellent electrical insulation; dielectric properties change little with temperature and frequency, small dielectric loss; resistant to arc and corona, non-flammable, hydrophobic, moisture-proof, and excellent physiological inert.

2. Silicone grease 295-3D

Packaging: drum

Application: widely used as filter for semiconductor crystal liquid, electrical insulation for electrical instruments, lubricant under high and low temperatures, pollution flashover for insulator; is rust- and corrosion-proof for electrical contact and damping; shock-proof for many facilities; can also be used as mold release agent and defoaming agent.

Characteristics: a type of semitranslucent, odorless, non-toxic, non-corrosive resinoid made of methyl silicone oil and fumed silica by mechanical mixing; has excellent electrical insulating properties, is resistant to low temperatures and oxidization, good chemical stability and lubricity, high flash point, low solidifying point, low vapor pressure; can be used over a long period of time within a temperature range of -50C to 180 C; can be used for moisture-proofing, defoamation, ejection, and damping; will not disperse with long-term use.

3. 201 methyl silicone oil

Packaging:  plastic or galvanized drum.

Application: used widely for electrical insulation, as a lubricant, for shock- and moisture-proofing, defoamation, ejection, damping, as a heat carrier, and hydraulic oil; also as additive to paint and glazing agent and as additive to plastics processing to improve mold release properties and wear resistance; also as a component of cosmetics and drugs.

Characteristics: transparent, odorless, non-toxic oily liquid with a high flash point, low solidifying point, good heat stability and resistance to high and low temperatures; can be used over a long period of time within a temperature range of  -50C to  180 C (in air isolation or inert atmosphere, long-term working temperature can reach 200 C); weak surface tension, high shrinkage, good anti-shear properties, small viscosity-temperature coefficient, good lubricating performance, excellent resistance to oxidization and ozone; also excellent electrical insulation, dielectric properties and changes little with temperature and frequency; small dielectric loss; resistant to arc and corona, non-flammable, hydrophobic, moisture-proof, and excellent physiological inert.

4. Silicone grease 296-2

Packaging: galvanized iron drum, with plastic liner (1 kg, 2 kg, 6 kg)

Applications: Can be used as lubricant for shaping machines, hot melt machines, and stretching machines in dyeing industry.

Characteristics: made of lithium soap thickening methyl phenyl silicone; resistance to high temperatures and oxidization, small viscosity-temperature coefficient, good lubricating performance; not easily decomposed by oil; long lifetime, with good chemical stability; non-corrosive and can be used over a long time below 220 C.

5. DRZ-1 thermal grease

Packaging: galvanized iron drum, with plastic liner (1 kg, 2 kg, 6 kg)

Applications: mainly used as heat transfer medium for electronic components, such as giant transistors (plastic pipe), interface of diode and base material (aluminum, copper board); insulation for commutator and electricity.

Characteristics: silicone grease cannot coexist with strong acid or alkali; when heated, even a trace of acid or alkali will lead to the gelation of silicone grease; lead, selenium, and tellurium enhance gelation; contact with such substances should be avoided and direct contact with lead or tin is to be avoided; to keep silicone grease characteristics, contamination should be prevented in storage and use; before surface treatment of instruments with this grease, make sure the surface is spotless.

6. Moisture-proof insulation grease JYZ-86

Packaging: galvanized iron drum, with plastic liner, 4 kg bottle

Applications: can be used for insulating, lubricating, moisture-proofing, sealing and as a protective coat; applied under ejection or damping situation.

7. Phenylmethyl silicone oil

Type: 250-30 255-150A 255-150B 255-80

Packaging: galvanized iron drum (200 kg) or plastic drum (20 kg).

Transportation: transported and stored as non-dangerous goods; avoid sun and rain exposure.

Applications: used for insulation, lubricant, for damping; shock-, moisture-, and dust-proof; high-temperature hydraulic oil and heat carrier (250-30 is mainly used as immersion oil for electrical capacity); can improve single capacity 4-5 times over similar types, with large temperature range, safer, more reliable, good gassing properties and excellent dielectric properties; an excellent impregnant, and can be used as extender oil for transformers and signal transmission medium for all types of pressure transmitters.

Characteristics: achromatic or light yellow transparent liquid; same as methyl silicone oil, with excellent electrical insulating properties, resistance to ozone and corona, and moisture-resistant hydrophobic properties; small viscosity-temperature coefficient and surface tension, good shear resistance and large compression; because of the phenyl in the molecules , it is better than methyl silicone oil in resistance to high temperatures and radiation, and in lubricating performance and solubility; also has absorbency of UV rays, with a temperature range of -50 ~+250 C.  

8. Ultra high vacuum diffusion pump oil

Type: 275、274A、274T

Packaging: plastic drum (5 kg, 25 kg, 200 kg)

Application:  used in electrical and electronic industries for manufacturing vacuum system with plating metal film for TV picture tubes, fluorescent tubes, cathode-ray tubes, light bulbs, capacitor and rectifier.

Metallurgy: used for vacuum system of ultrapure silicon production equipment, vacuum smelting plants, vacuum sintering plants, and metal degassing device.

Optics:  used for vacuum system for surface treatment of optical lenses, and vacuum coating of optical mirrors. 

Plastics: for metallization, manufacturing of protective coating and reflective coating of plastic products.

Other: for particle accelerators, molecular distillation devices, reactors, nuclear engineering research facilities, and mass spectrographs; in space flight simulation.as high-temperature heat carrier and transmission fluid for all kinds of facilities and instruments.

Characteristics: these are siloxane oligomers with methyl and phenyl, with low saturated vapor pressure and high vacuum degree; vapor pressure changes extremely with temperature; good oxidation resistance, thermal and chemical stability; very suitable for high-vacuum diffusion pumps; product selection is based on vacuum degree, pumping speed and pump.

9. Hydroxy silicone oil

Type: GY-209-1  GY-209-2    GY-209-3

Packaging: plastic drum (5 kg, 25 kg, 200 kg)

Applications: used as structure controlling agent for silicone rubber; can simplify the processing of silicone rubber and improve processability and transparency of the product; can also be applied to anti-adhesive treatment of paper.

Characteristics: has the excellent properties of methyl silicone oil and brings special properties to hydroxy oil; GY209-3 has low viscosity and high hydroxy content.

10. Water soluble silicone oil

Type: GYS-211

Packaging: plastic drum (5 kg, 25 kg, 200 kg)

Application: cosmetic additive for shampoo, conditioner, mousse, hair spray, creams, shaving spray, and perfume; also as textile finishing agent; can be applied to fiber fabric, natural fabric, protein fiber fabric, and fabric blend to make fabric soft, hydrophilic, antistatic and shrink-proof; can also be applied to silk yarn and sewing thread to make them glossy and lubricant and give them better sewing properties.

Characteristics: achromatic or light yellow, transparent, oily substance, non-toxic; miscible with water at any ratio; hydrolysis resistant, good stability; low surface energy; likely to be dispersed in film; high surface activity and flexibility; good wetability, lubricity, and antistatic; shows foaming properties above cloud point and defoaming properties below cloud point.

11. Hydrosilicone oil

Type: GY202

Packaging: plastic drums (5 kg, 25 kg, 200 kg)

Applications: waterproofing agent and softener for natural and synthetic fabrics; waterproofing and anti-adhesive agent for paper, and softener for glass fiber.

Media Inquiry
Tel:028-85965839
Contact Us | Site Map | Legal | RSS | FAQs
Zhonghao Chenguang Research Institute of Chemical Industry all rights reserved. Without written authorization from
China Haohua Chemical (Group) Corporation such content shall not be republished or used in any form.
Produced By CMS 网站群内容管理系统 publishdate:2019/09/09 08:33:27