1、PTFE superfine powder
Model: CGUF201
Packaging: uses double-layer PE plastic packaging put inside a hard-surface 20 kilogram barrel.
Unit: barrel
Transportation: transported as non-dangerous goods, but must avoid sun and rain exposure.
Applications: can be used as a modifier or oil-free lubricating material for rubber, plastics, paints, inks, lubricants, and grease.
Characteristics: low molecular weight, narrow molecular weight distribution, excellent dispersibility and lubrication.
Additional: (1) appropriate for 22 ~ 26 ℃, in a smoke-free environment.
(2) Avoid wetness, coagulation, or adverse circumstances in transportation and storage.
2、PTFE modified suspension resin
Model: CGM011A - fine particle PTFE modified suspension resin
CGM011A (F): fine particle modified-suspension resin used for stuffing
CGM011B
CGM011C
Packaging: uses double-layer PE plastic packaging put inside a hard-surfaced 25-kg barrel.
Unit: barrel
Transportation: avoid wetness during transportation
Applications and characteristics
1.spacer, gaskets, seals; creep resistant, formable
2.ball valve; creep resistant
3.tee joint, elbows; crack resistant, creep resistant
4.auto parts (hydraulic steering, seals); creep resistant, resists bending, wear resistant
5.bellows; flex-fatigue resistant
6.diaphragms ; flex-fatigue resistant, formable
7.board lining; low permeability, weldable, formable, flange-processing
8.containers; low permeability, transparent, cracking-esistant in molding
9.chemical storage tanks; low permeability, transparent, heat-sealing
10.medicine containers; blow-molding suitable
11.metal insert products (butterfly valves, impellers, solenoid valves, mixers); stress-cracking resistant, meltible
12.electrical insulation; smooth surface, high breakdown voltage, stretchable
13.demolded film; smooth surface, not sticky
14.filling base stock; good compatibility with filling materials, creep-resistant, bending-resistant
Characteristics: same good performance as conventional homopolymer PTFE resin, such as heat-resistance, chemical-stability resistance, low friction, not sticky, improves creep-resistance, weldable, tensile-ductility resistance, bending-deflection resistance, and transparency.
Additional: 1. molding operation should be done in clean, smoke-free environment, at 22 ~ 26 ℃.
2.Avoid wetness, coagulation, or other adverse circumstances in transporting and storing.
3.Pay attention to sintering temperature control and prevent over-heating.
3、Extrusion high compression ratio polytef dispersion resin
Model: CGF288 CGF268
Packaging: uses double-layer PE plastic packaging put inside a hard-surface 25-kg barrel
Unit: barrel
Transportation:avoid pressure or collision damage during transporting
Applications:this high-compression ratio PTFE dispersion resin has excellent electrical properties, and is non-stick, chemical resistant, and weather resistant and is widely used in as insulation for wire in airplanes,; wire in electronic equipment; high temperature wire; generator and fuel piping; steam hoses; viscous material hoses; hydraulic control hose; pumps, valve parts, and bushings.
Characteristics: CGF288 dispersion resin is generally used for extrusion molded products and has a compression ratio of 900:1 or above; it is especially suited to capillary tubing, arund φ0.9/0.5, φ0.6/0.3; it has good continuity and perfect appearance, is burr-free and smooth, comparable to the Japanese F201; it has good transparency, is flat, smooth, soft, with good mechanical and electrical properties, comparable to the Japanese F201.
CGF268 dispersion resin is generally used for extrusion molded products and has a compression ratio of 400:1～1500:1; it is especially suited to capillary tubing, around φ1.8/1.5,φ0.9/0.5; it has good continuity and perfect appearance, is burr-free and smooth, with good transparency, and is flat, smooth, and soft, wirh good mechanical and electrical properties.
Additional:
1. avoid pressure or collision damage in transport, storage and handling.
2. Temperatures in the operating room should be held to 23 ~ 25 ℃.
3. Mind the temperature controls and avoid runaway temperatures which could cause problems for humans.
4. Be used in a smoke-free workplace.
5. Provide adequate indoor ventilation.
4、High fluorine-containing fluororubber
Model: FPM246T
Packaging: packed in a 5-kg PE plastic bag and put inside a hard-surface 25-kg box.
Unit: box
Transportation:
Applications: mainly used in piping and oil seals for automobiles .
Characteristics: It has the same good properties as conventional fluororubber, such as high-temperature resistance, and its improved fluorine content, means improved medium resistance, especially oil-resistance.
Additonal: should be kept in a clean, cool, dry environment.
5、Fluororubber FPM2301
Model:FPM2301
Packaging: packed in 5-kg bags, put inside 25-kg cardboard boxes.
Unit:box
Tansportation: transported as non-dangerous goods, but must avoid sun or rain exposure.
Applications: It has excellent acid and alkali resistance and fluid and oil resistance, and radiation resistance and good mechanical performance; good for electrical insulation; widely used in automotive industries and for off-road vehicles; in oil exploration and the petrochemical industry, for industrial pollution controls; and for hydraulic and pneumatic devices; previously used for molded products such as O-rings, V-shaped rings, cups, diaphragms, and oil seals.
Characteristics: It has excellent solvent-resistance and low-temperature performance especially when compared to conventional fluorine rubber.
Additional: should be stored in a cool, dry place storage for a period for no more than one year from the date of production; re-examination as per the standard of Chenguang R.I.C.I is needed if the storage period exceeds one year.If the products meet the requirements, they can still be used.