1. CGM021 suspended fine particle PTFE resin
Categories:
|
Type |
Trademark |
|
CGM021-CBX |
CGM021-CBX-A CGM021-CBX-B |
|
CGM021-DJX |
CGM021-DJX-1 CGM021-DJX-合 CGM021R-DJX-1 CGM021R-DJX-Q |
|
CGM-16 |
CGM-16 CGM-16（H） CGM-16R CGM-16R（H） |
|
CGM-12 |
CGM-12 CGM-12R |
|
CGM-16（F） |
CGM-16（F） CGM-16R（F） |
Packaging: airtight wrapping, double layer PE, stored in net weight 25kg cardboard drums.
Applications:
|
Type |
Main use |
Applications |
|
CGM021-CBX |
Type A applicable to general PTFE turning film; Type B to PTFE turning boards. |
Widely used in the chemical, mechanical, petroleum, medicine, electronic, and optical industries. |
|
CGM021-DJX |
Pressing sintering, used for large steel bars, spare parts. |
|
CGM-16 |
Specially used for moldings, for small finished pieces or spare parts. |
|
CGM-12 |
Molding，for small finished pieces or spare parts. |
|
CGM-16（F） |
Filling materials, for small finished pieces or spare parts. |
2.
PTFE Resin
Type: CGMO31
Packaging: airtight wrapping, double-layer PE, stored in of net weight 25-kg cardboard drums.
Applications: anti-corrosion liner in chemical engineering, insulation for wire or cable in electrical or electronics industries, anti-stick roller in textile industry; can be made into tube, board, stick, membrane, bearing, piston ring, washer, or filling materials.
Characteristics: good chemical stability and chemical corrosion and weather resistance; small friction factor, and large operating temperature range; no-stick, non-absorbent, incombustible properties.
3. CGM031 suspended medium size particle PTFE resin
Packaging: airtight wrapping, double layer PE, stored in net weight 25-kg cardboard drums.
Application: for molding processing, can be used for turning steel bar, washers or spare parts; wide-use in chemical and mechanical engineering, and petroleum, medicine, electronic, optical industries.
Characteristics:
|
Trademark
Item |
CGM 031A |
CGM031B |
CGM 031C |
|
Level-1 |
Qualified |
Level-1 |
Qualified |
Level-1 |
Qualified |
|
Density
g/l |
420 ± 100 |
|
Average size
μ m |
90~130 |
70~90 |
130~260 |
|
Tensile strength
MPa ≥ |
25.5 |
22.5 |
25.5 |
22.5 |
25.5 |
22.5 |
|
Elongation % ≥ |
250 |
250 |
250 |
250 |
250 |
250 |
|
Moisture content % ≤ |
0.04 |
|
Melting point C |
327 ± 5 ℃ |
|
Standard relative density |
2.13~2.19 |
|
Shrink ratio % ≤ |
4.5 |